Instructions
Ericsson | Nokia | Siemens

 

Ericsson

The following phone keys correspond to the following functions :

The Number keys, 1 - 9 will insert notes into the ringtone sequence. 1 gives a C and 9 a high D. Holding down a number key will make the note longer.

The # key will increase or decrease the pitch in steps of one semitone. Press once to make a note a sharp (#), and twice to make it a flat (b), pressing three times will return the note to its normal pitch.

The << and >> keys allow you to scroll backward and forward within the ringtone's sequence of notes. Press and hold either to jump to the beginning or end.

The Zero key will move a note up or down one octave. A + sign is added before a note name if the octave has been raised.

The CLEAR key will erase the note to the left of the cursor.

NOTE : Pressing and holding the CLR button will erase the entire sequence.

Nokia

If your phone has Composer, you can enter one ringing tone of your own.

Creating a new ringing tone
When you enter this function, the tone that you created previously is shown, if available.

To enter a new or edit an existing tone:

1. Enter the desired notes

Press:

1 for note c
2 for note d
3 for note e
4 for note f
5 for note g
6 for note a
7 for note b
0 for a p (pause = "Rest")

The phone plays each note after it is entered (unless the phone tones are off).

2. To adjust the characteristics of the note, do as follows:

Note duration: 8 shortens (-) and 9 lengthens (+) the duration of the note or rest. The default duration is 1/4. The duration is shown in front of the note, e.g. 16d denotes a note d with duration1/16.

Rest: 0 inserts a rest (i.e. pause) of the same duration as the previous note.
The default duration of a rest is one quarter note (1/4).
The rest is indicated by the - character.

Octave: *+ sets the octave for new notes. The octave is shown as a number after the note (e.g. e1).

Pitch: # makes the note sharp (indicated by # in front of the note), e.g. #f. The pitch selection is not available for notes e and b.

3. To edit the notes, do as follows: and to move the cursor right or left, respectively. C deletes a note or a rest to the left.

4. After you have completed the tone, press Options, choose one of the functions below, and press OK.

Play??? : Plays back the notes to the left of the cursor.
Save??? : Allows you to name the tone and add it to the ringing tone list.
Tempo??? : Allows you to select the desired tempo for the tone (in beats per minute).
Send??? : Allows you to send the tone to another phone.
Clear Screen??? : Deletes all the notes from the display.

Siemens

The following Siemens models are able to accept a manual ringtone input :

C25, C35i, S25, S35i, M35i

In order to input a tone, in your Menu, scroll to Ringer Tones and Select, then scroll to "Record Melody" and "Select".

The following phone keys correspond to the following functions :

The Number keys

1 will insert note C

2 will insert note D

3 will insert note E

4 will insert note F

5 will insert note G

6 will insert note A

7 will insert note B

8 will insert note C octave

The Zero 0 key will enter a pause into the sequence.

Holding down a number key will make the note longer.

The # key will move a note up or down one octave.

The * key moves the note up a semitone ("is").

On some models, use the menu to Play or Rewind the tone

On other models:

The key will Play the ringtone sequence.

The key will Rewind the ringtone sequence.

The and keys will make notes higher or lower.